1. For efficiency, the work triangle (the space between the sink, refrigerator, and stove) should measure 26′ or less with no single side longer than 9′, or less than 4′.

2. In kitchens smaller than 150 sq. ft., opt for at least 13′ of base cabinets, 12′ of wall cabinets, and 11′ of countertop. In kitchens which are larger, go with at least 16′ of base cabinets, 15 1/2′ of wall cabinets, and 16 1/2′ of countertop.

3. For convenience, plan work aisles to be at least 42″ wide for one cook, and at least 48″ wide in multi-cook kitchens.

4. Specify a minimum of 24″ of counter space on one side of the sink and at least 18″ on the other.

5. To create the most accessible landing for unloading groceries, allow at least 15″ of counter space on the handle side of a standard refrigerator; on both sides if it’s a side-by-side model. Or include a landing area directly across from the refrigerator, but no more than 48″ away.

6. For cleanup ease, install the dishwasher within 36″ of one edge of the sink and allow for at least 21″ of standing room next to it.

7. For microwaves and ovens, provide at least 15 ” of counter space nearby, at least 16″ deep.

8. For optimum clearance, no entry, appliance, or cabinet doors should interfere with another.

9. For comfort and to help avoid repetitive-motion injury, plan for work counters of different heights; between 28 and 36″ off the floor (easier for chopping and seated-use access), and between 36 and 46″ for general tasks (higher counters accommodate taller cooks).

10. To install a cabinet unit above the cook top, make sure the clearance is at least 24″ for a fireproof surface, 30″ for an unprotected surface.

Designing a kitchen is as much a science as it is an art. Knowing the recommended measurements to use when planning the project can make all the difference in the final outcome.

Author Bio
Harvey Juric, is a veteran custom home builder in Southern Ontario. If you like this article, there is more at: www.ontario-home-builder.com

Article Source: http://www.ArticleGeek.com – Free Website Content

The post 10 Important Things to Consider Before Designing a New Kitchen from Atlas Homes TX appeared first on Atlas Homes TX. Custom Homebuilder / Major Remodeling.

With the rising energy costs there has been an increase in interest for energy saving appliances. Efficent “tankless” water heaters have become very popular for their capability to heat hot water on demand, with no storage tank required. Instead of holding water in a traditional water tank, they circulate the cold water through a series of electrically heated coils that warm the water as it moves pass this heat source. This newer process of warming water requires more expensive equipment than the conventional water heater, but this money is regained in the long term with energy efficiency savings. The energy savings is mainly gained from no longer needing to heat an entire tank of water.

Since the tankless water heaters do not store hot water but rather constantly heat water as it is demanded, they do not run out of hot water. There is one exception, to this “endless” supply of heated water. The flow rate is limited. In other words if you simultaneously use more water than the flow of the water heater (i.e. 3 people showering at one time) you will receive unheated water.

Since conventional water heater stores the water together in a large tank it is able to provide water at a set temperature. Tankless water heaters differ in this aspect since they are dependent upon the incoming water temperature and the flow rate. The incoming water temperature can vary greatly from summer to winter. The capacity of a tankless water heater is generally measured by how many temperature degrees it can increase water temperature by gallons per minute (gpm). Most tankless water heaters are powered by gas to better handle the heat output and response time required. These gas powered water heaters require proper venting, normally more venting than the older, conventional water heaters required. If you are replacing a conventional electric water heater tank, you may want to add a power vent in the side of the wall. This would be the less costly alternative if there is no existing roof vent. Some of the smaller and more portable single-fixture units are powered electrically.

The post On-Demand Water Heating from Efficient Tank less Water Heaters with Atlas Homes appeared first on Atlas Homes TX. Custom Homebuilder / Major Remodeling.

The good news is there are several options available to you that can easily update your kitchen with a modern look. Some options are expensive and others are more economical.

If you like the cabinet layout and the cabinets are in good condition, refacing or resurfacing your kitchen cabinets may be a good choice for you.

Refacing or resurfacing consists of replacing the cabinet doors and drawer fronts with new ones and then treating the cabinet frame with a matching veneer. There are many types of woods and plastics available for this, so your options are virtually unlimited.

To get the best results, it’s always best to hire a professional to do this work. It can be quite expensive, though, ranging anywhere from $3500 to over $10,000. The work usually takes 2-4 days, depending on how many cabinets and drawers are involved.

If your cabinets are weak or damaged or you just want to change their design, replacing them entirely is another option. Replacement cabinets may not cost much more than refacing/resurfacing them, either. Brand new cabinets can add more usefulness to your kitchen and increase the value of your home, as well

If resurfacing or replacement of your kitchen cabinets doesn’t fit your budget, there are much less expensive alternatives.

My first choice for renewing the look of kitchen cabinets is paint. What a difference a coat or paint can make!

For a retro look you can use splashy colors such as pink, turquoise or orange. Be brave and paint designs on the cabinets or use stencils or a faux finish. Add some matching hardware and you’ve got new cabinets for less than $300!

Another idea is to permanently remove all the cabinet doors. This wouldn’t be appropriate or even functional for every style of kitchen. It might work well for a cottage kitchen design or even an antique Victorian design. You could line the shelves with lace or doilies that flap over the edge to add to the look.

An alternative to completely removing the cabinet doors is to replace them with old windows that are the right size. You could also create new doors from different types of materials such as bamboo or fabric.

Another idea for resurfacing kitchen cabinets is to wallpaper them or apply contact paper. A plain pattern is best and, of course, make sure it is washable. You don’t necessarily need to cover the whole surface. You could cut out different shapes or patterns and apply them to the cabinet surface. This would be a good short-term solution to freshening up your kitchen.

So there you have it. There are many ways to make your kitchen cabinets look great without breaking the bank!

The post Make Your Kitchen Cabinets Look Great for Less with Atlas Homes TX appeared first on Atlas Homes TX. Custom Homebuilder / Major Remodeling.

Benefits

• Removes the uncertainty of a contingency
• You can lock in current builder pricing, avoiding potential price increases
• Creates the comfort to purchase desired options
• Allows you to plan your move with confidence
• Eliminates the anxiety of “if it sells in time”
• Provides the buyer more options on existing home sale

The post Home Buyout Program – Atlas Homes appeared first on Atlas Homes TX. Custom Homebuilder / Major Remodeling.

Let us take a look at 7 of the most popular kitchen countertop materials being used today:

Granite
A natural stone, granite is a popular choice for it’s classic beauty and durability. Granite is the hardest and densest of the natural stones. It can create a kitchen countertop that is extremely scratch resistant and can keep its luster longer than most materials. granite slabs are the most expensive of all kitchen countertop surfaces, although it is still considered a very practical material in that it is virtually indestructible.

Marble
Another natural stone, marble is considered to be the height of elegance and will last longer than most kitchens. It is however, is very expensive and requires some care: acidic foods such as orange juice will etch the finished surface of a marble kitchen countertop.

Slate
Because of it richness and beauty slate is usually used in interior applications such as kitchen countertops, bathroom sinks or fireplace surrounds. It can be used in either modern or traditional kitchens as well as in combination with marble. Slate is durable, strong, and can withstand hard use. It is less expensive than marble.

Concrete
This is one of the biggest trends in kitchen countertops today. It is a good look for clean, industrial and contemporary kitchen designs. Available in pre formed sections or poured and formed on-site. Concrete is a good material for unusually shaped counters. Concrete kitchen countertops are expensive, require a sealant and must be treated with care. The countertop can crack if the concrete should contract. Concrete can be stained any color. The most popular color is a natural gray tone. The top layer can be finished as desired.

Corian
A solid surface material that first became popular in the 1990’s It is highly recommended by kitchen countertop experts. It is a totally manmade product and is not porous. As a solid surface it can easily be repaired if scratched or burned.

Stainless Steel
Advantages include very hygienic, easy to clean, has ability to stand up to exteme wear and heat. Stainless steel can provide a great look for an ultra modern kitchen. Some disadvantages with stainless is that it can be noisy and that scratches can develop.

Tile
Tile surfaces can be tough, hard-wearing, takes hot pans, heat and stain resistant as well as beautiful. There are many types of tiles including ceramic, porcelain, quarry, glass, natural stone and mosiac. Available in many colors, sizes and textures. It has good design flexibility. Tile can often be used for trim or backsplashes. The downside of tile is that the grouts can be easily stained. Also the tiles can become chipped or cracked.

Author Bio
James Mahoney is the owner of Kitchen Designers Idea.com. Learn about today’s kitchen design ideas by visiting his site at Kitchen Designers Ideas.com. If you liked this article and would want to subscribe to his information packed newletter visit: Kitchen Designers Ideas.com

The post 7 Materials For Creating The Perfect Kitchen Countertop -Hill Country appeared first on Atlas Homes TX. Custom Homebuilder / Major Remodeling.