With the rising energy costs there has been an increase in interest for energy saving appliances. Efficent “tankless” water heaters have become very popular for their capability to heat hot water on demand, with no storage tank required. Instead of holding water in a traditional water tank, they circulate the cold water through a series of electrically heated coils that warm the water as it moves pass this heat source. This newer process of warming water requires more expensive equipment than the conventional water heater, but this money is regained in the long term with energy efficiency savings. The energy savings is mainly gained from no longer needing to heat an entire tank of water.

Since the tankless water heaters do not store hot water but rather constantly heat water as it is demanded, they do not run out of hot water. There is one exception, to this “endless” supply of heated water. The flow rate is limited. In other words if you simultaneously use more water than the flow of the water heater (i.e. 3 people showering at one time) you will receive unheated water.

Since conventional water heater stores the water together in a large tank it is able to provide water at a set temperature. Tankless water heaters differ in this aspect since they are dependent upon the incoming water temperature and the flow rate. The incoming water temperature can vary greatly from summer to winter. The capacity of a tankless water heater is generally measured by how many temperature degrees it can increase water temperature by gallons per minute (gpm). Most tankless water heaters are powered by gas to better handle the heat output and response time required. These gas powered water heaters require proper venting, normally more venting than the older, conventional water heaters required. If you are replacing a conventional electric water heater tank, you may want to add a power vent in the side of the wall. This would be the less costly alternative if there is no existing roof vent. Some of the smaller and more portable single-fixture units are powered electrically.

The post On-Demand Water Heating from Efficient Tank less Water Heaters with Atlas Homes appeared first on Atlas Homes TX. Custom Homebuilder / Major Remodeling.

Let us take a look at 7 of the most popular kitchen countertop materials being used today:

Granite
A natural stone, granite is a popular choice for it’s classic beauty and durability. Granite is the hardest and densest of the natural stones. It can create a kitchen countertop that is extremely scratch resistant and can keep its luster longer than most materials. granite slabs are the most expensive of all kitchen countertop surfaces, although it is still considered a very practical material in that it is virtually indestructible.

Marble
Another natural stone, marble is considered to be the height of elegance and will last longer than most kitchens. It is however, is very expensive and requires some care: acidic foods such as orange juice will etch the finished surface of a marble kitchen countertop.

Slate
Because of it richness and beauty slate is usually used in interior applications such as kitchen countertops, bathroom sinks or fireplace surrounds. It can be used in either modern or traditional kitchens as well as in combination with marble. Slate is durable, strong, and can withstand hard use. It is less expensive than marble.

Concrete
This is one of the biggest trends in kitchen countertops today. It is a good look for clean, industrial and contemporary kitchen designs. Available in pre formed sections or poured and formed on-site. Concrete is a good material for unusually shaped counters. Concrete kitchen countertops are expensive, require a sealant and must be treated with care. The countertop can crack if the concrete should contract. Concrete can be stained any color. The most popular color is a natural gray tone. The top layer can be finished as desired.

Corian
A solid surface material that first became popular in the 1990’s It is highly recommended by kitchen countertop experts. It is a totally manmade product and is not porous. As a solid surface it can easily be repaired if scratched or burned.

Stainless Steel
Advantages include very hygienic, easy to clean, has ability to stand up to exteme wear and heat. Stainless steel can provide a great look for an ultra modern kitchen. Some disadvantages with stainless is that it can be noisy and that scratches can develop.

Tile
Tile surfaces can be tough, hard-wearing, takes hot pans, heat and stain resistant as well as beautiful. There are many types of tiles including ceramic, porcelain, quarry, glass, natural stone and mosiac. Available in many colors, sizes and textures. It has good design flexibility. Tile can often be used for trim or backsplashes. The downside of tile is that the grouts can be easily stained. Also the tiles can become chipped or cracked.

Author Bio
James Mahoney is the owner of Kitchen Designers Idea.com. Learn about today’s kitchen design ideas by visiting his site at Kitchen Designers Ideas.com. If you liked this article and would want to subscribe to his information packed newletter visit: Kitchen Designers Ideas.com

The post 7 Materials For Creating The Perfect Kitchen Countertop -Hill Country appeared first on Atlas Homes TX. Custom Homebuilder / Major Remodeling.